How to Use the AOD3 Curved Ice-Cooling IPL for smooth skin
A step-by-step guide to using the AOD3 curved ice-cooling IPL for effective, safe hair removal and smooth skin at home.
Getting started: prepare your skin and check compliance marks
Before you press a single button, take a few minutes to prep. Start with a clean, dry, and freshly shaved treatment area. Do not use the device on broken, irritated, or sunburned skin, and always perform a patch test on a small area (like your inner wrist) 24 hours in advance to check your tolerance. When you unpack your AOD3, look for the CE and UKCA marks on the device or packaging. These certifications confirm the unit meets European and UK safety, health, and electromagnetic compatibility requirements, which matters greatly for a device that emits light and cooling. You should also verify that the power supply works with UK sockets or that you have the correct plug adapter, as many UK retailers now sell this model specifically with a three-pin plug to meet local expectations.
Set your intensity and use the ice-cooling function
The AOD3 features a curved head combined with ice-cooling technology, which sets it apart from simpler IPL devices. Switch the unit on and cycle through the intensity levels. Start on a low level (1–2) for sensitive zones like the underarms or bikini line, and increase to a higher level (3–5) for larger, more tolerant areas like your legs and forearms. The curved glass head is designed to sit flush against your skin, and the ice-cooling function cools the surface instantly, numbing the area and reducing the heat sensation you might feel from the flash. This makes each treatment noticeably more comfortable, especially on areas where your skin sits close to the bone, such as the shins or knees.
Glide and flash: the step-by-step treatment routine
Using the AOD3 is a two-hand operation. Hold the device at a 90-degree angle and press the curved head firmly against your skin. The curved design lets you maintain full contact even on awkward contours. For continuous gliding, press the flash button and slowly move the device along the skin in straight, slightly overlapping lines. Alternatively, use the single-flash mode for precise work around the upper lip or chin. Do not press the flash button while the device is not touching your skin, and never hold the flash in one spot, as this can cause discomfort or uneven results. Work systematically across each area, from your ankle up to your thigh, and remember to cover every section once per session; going over the same spot multiple times is unnecessary and increases the risk of irritation.
Aftercare, timing, and what results to expect
Immediately after your session, apply a gentle, fragrance-free moisturiser to soothe the treated skin. The ice-cooling function already minimises redness, but a light lotion helps maintain hydration. Avoid sun exposure, tanning beds, and hot baths for 24 hours after treatment. For best